Concrete Wall Calculator

</> Embed this calculator on your site

Use this concrete wall calculator to work out how many cubic yards (or cubic metres) of concrete a poured wall needs, plus bag counts, weight, rebar and an optional cost estimate. Enter the wall length, height and thickness and the numbers update instantly, with waste built in and every order quantity rounded up, never down.

Concrete wall dimensions diagram A concrete wall shown as a box with length along the bottom, height on the left and thickness on the right side. Net: 5.93 yd³ Length 30 ft Height 8 ft Thickness 8 in

Diagram updates with your numbers when you calculate.

Total door and window area in one wall. Leave blank to ignore openings (the safer, larger estimate).

Estimates only. By using this calculator you agree to our Terms.

</> Embed this calculator on your site

Free for any website, blog, classroom or intranet. No sign-up, no ads inside the embed. Copy the code and paste it into your page.

Preview the embed

How to Use This Concrete Wall Calculator

Choose imperial or metric, then enter the length, height and thickness of one wall and how many identical walls you are pouring. Subtract door or window openings if you wish, set a waste allowance with the slider, and optionally add a rebar grid and a price per cubic yard or cubic metre. The calculator returns an order quantity rounded up, bag counts, estimated weight, rebar quantities and a table showing how different waste allowances change the total.

Why This Matters

Concrete is one of the few building materials you cannot return or top up later. Ready-mix trucks charge by the cubic yard, the clock starts when the driver arrives, and a wall that runs out of concrete halfway up leaves a cold joint, a weak seam where fresh concrete meets concrete that has already begun to set. Order too much and you pay $150 to $200 per yard for material that ends up in a pile.

The usual jobs are easy to picture. A 40-foot foundation stem wall, 3 feet high and 8 inches thick, holds about 80 cubic feet, roughly 2.96 cubic yards before waste. A 30 by 8 foot basement wall at 8 inches thick is almost 6 cubic yards. Homeowners use the number to decide between bagged mix and a truck, since beyond about one cubic yard bags become impractical. Contractors use it for bids, and many suppliers add a short-load fee on small orders, so knowing your true total helps you decide whether to combine pours.

How It's Calculated

Everything starts with the volume of a rectangular slab standing on its edge:

Volume (ft³) = length (ft) × height (ft) × thickness (in) ÷ 12 × number of walls
Net volume = volume − (opening area × thickness ÷ 12 × walls)
Total = net volume × (1 + waste %)
Cubic yards = ft³ ÷ 27 Metric: m³ = length × height × thickness (all in m)

The order quantity is rounded up to the next quarter cubic yard (or 0.1 m³), never down. Bag counts divide your total by typical yields, 0.30 ft³ for a 40 lb bag, 0.45 ft³ for 60 lb and 0.60 ft³ for 80 lb, and round up to whole bags. Weight uses 150 lb per cubic foot (about 2,400 kg/m³) applied to the total including waste, so it errs heavy.

For rebar, the number of bars in each direction is the dimension divided by your spacing, rounded up, plus one. Vertical bars run the wall height and horizontal bars run the wall length. The calculator adds 15% for lap splices and cuts, then divides by 20 ft stock bars (6 m in metric) and rounds up. Openings are not deducted from rebar.

As a safety check the calculator compares your thickness with the common ACI 318 bearing-wall rule of thumb, the greater of 4 inches or one twenty-fifth of the shorter unsupported dimension, and warns if you fall below it. Residential foundation walls are covered by prescriptive tables in IRC R404.1. This tool is a quantity estimator only. It is not an engineering design, permit or inspection approval, and local codes and adopted editions vary.

Worked Example

Say you are pouring one wall 30 ft long, 8 ft high and 8 in thick, with no openings, a 10% waste allowance and a single layer of #4 rebar at 16 in spacing.

These are the values the calculator shows with its default inputs.

Tips & Common Mistakes

Frequently Asked Questions

How much concrete do I need for a wall?

Multiply length by height by thickness (in the same units) to get volume, then divide cubic feet by 27 for cubic yards. Add 5 to 10% for waste and round up. This concrete wall calculator does all of that for you.

How many bags of concrete make a wall?

An 80 lb bag yields about 0.60 ft³, so a 160 ft³ wall needs roughly 267 bags before waste. For anything over about one cubic yard, ready-mix delivery is almost always cheaper and gives a more consistent pour.

How thick should a concrete wall be?

Common residential foundation walls are 8 inches thick, with 6 inches used in some prescriptive cases and 10 inches or more for taller or more heavily loaded walls. Check the IRC R404.1 tables or ask an engineer, because soil pressure, height and reinforcement all matter.

How much waste should I allow when ordering concrete?

Plan on 5 to 10% for straight forms on a level base and 10 to 15% for uneven ground, long pumping lines or complicated shapes. The cost of a little extra is small compared with a short pour and cold joint.

Does this calculator include the footing?

No. It calculates the wall only. Work out the footing volume separately and add the two together before placing your order.

Is the result safe to build from or submit for a permit?

It is a material quantity estimate, not a structural design. Always follow your local building code, the edition your jurisdiction has adopted, and the advice of a licensed engineer for load-bearing, retaining or tall walls.

Related Tools